How To Measure Your Wrist For A Link Magnetic Bracelet or Cuff Magnetic Bracelet

How Do I Know What Size Link Magnetic Bracelet Or Cuff Magnetic Bracelet To Order? Bracelet lengths over 8 ¾ inch and less than 7 inch result in a return for resizing rate of over 90%. If the length of your bracelet purchase falls in this range, PLEASE double-check the measurements before completing your order. That is the question we hear most often at AAAMagnetic. Below, find images and a few hints we hope will help you in determining the correct size for your magnetic bracelet. Another question we often hear is "Do the titanium or stainless steel magnetic link bracelets need to be tight on my arm/wrist?" and the answer is absolutely not. All of our magnetic link bracelets use high gauss magnets which allow you to wear the bracelets like the quality piece of jewelry they are. We suggest you wear your link bracelet loose and comfortable, allowing it to be worn 24 hours a day seven days a week. All of the images below show the same wrist being measured with a resulting length to order of 7 inches (FOR A LINK STYLE). When choosing your length from the order form click the size nearest to your measured length. Refer to image number 1 below to view the easiest method to determine the correct size for your magnetic link bracelet. We suggest placing the tape snugly around the wrist and then adding approximately 1/2 to 1 inch (add the 1/2 to 1 inch for link style bracelets only) for comfort. Image number 2 shows the method of placing your thumb under the tape to determine a comfortable size without having to add the 1/2 to 1 inch (add the 1/2 to 1 inch for link style bracelets only). REMEMBER! FOR CUFFS USE THE AUCTUAL MEASUREMENT OF YOUR WRIST FOR LINK STYLE ADD A MINIMUM 1/2 INCH. THE LINK STYLE MAGNETIC BRACELETS DO NOT NEED TO BE TIGHT. WEAR THEM LIKE A FINE PEICE OF JEWELRY When measuring for a cuff style (copper or stainless rope) use the actual measurement. Do not add any additional length.
CUFF SIZE		LINK SIZE

Don't have access to a cloth tape? Refer to image 3 below for a alternative method of measuring using anything from string to a strip of paper. Mark the paper strip or string as shown, then transfer it to a ruler. ADD 1/2 to 1 INCH FOR LINK BRACELETS ONLY Bracelet lengths over 8 ¾ inch and less than 7 inch result in a return for resizing rate of over 90%. If the length of your bracelet purchase falls in this range, PLEASE double-check the measurements before completing your order.